| Search For Keyword or Phrase: |
|
| Example: install toner cartridge |
 |
|
|
|
To find a specific fault code, try our Fault Code Search. |
|
|
|
For further help, try our Tips on Searching. |
|
|
|
Use the "How To" and "Solutions For" links on the navigation bar for a quick reference. |
|
|
|
|
| Frequently Asked Questions: |
- Print Engine Fault Message
Perform a Shutdown to Power OFF, Then Power ON / Boot the Nuvera . CAUTION: Follow these procedures to correctly power OFF and power ON (POPO) the machine. NOTE: Certain error conditions may occur if the machine is powered OFF, then powered ON too quickly. more...
- Black Lines and Streaks When Printing
NOTE: Depending on the software level, the selection for Corotron Cleaning Routine may be located under the sub-heading of Print Engine. The Print Engine: Corotron Cleaning Routine window will be displayed with the default selected as 'All Cleaners', this is the correct selection. When the process is successfully completed a message will indicate (depending on your software level) 'Make a selection and press [Start] to begin', click on [Close], or 'Complete' in the lower window, and an Exit . more...
- Xerographic Fault
This Problem Requires Additional Assistance. Related Fault Codes: 06-3045 09-2425 09-3160 09-3808 09-4145 09-4300 09-4340 09-4345 . more...
- Paper Jam in Print Engine Areas 3a, 3b, 5a, 5b, and 4 (Fuser)
Recommended sizes: 152 mm x 229 mm (6 x 9 inch), 229 mm x 305 mm (9 x 12 inch) . X . X . more...
- Cleaner Filter Needs to be Replaced
Cleaner Filter Needs to be Replaced . This Problem Requires Additional Assistance. more...
|
|
|
|
|
|
|
Any system messages that are shown in Online Support may vary slightly from those actually displayed on the product.
|
|
|
